15/25kV R-Stack

15/25kV R-Stack

This 600A connector has the connecting plug molded into the elbow body, eliminating the need for a separate piece. Our premolded composite is factory tested, with a greatly reduced installation force and stack height.

The result: an easier, more reliable, and cheaper option than traditionally stacked elbows.

More reliable — The R-Stack interface combines two units into one, eliminating the need for a connecting plug! This combination design reduces the risk of complications during assembly in the field, such as cross threading. And, each product is individually tested prior to shipment.

Easier to install — Total assembly force is only 25 lbs., as opposed to the 100 lb. force required to install a standard connecting plug. Also, the traditional spanner and torque wrenches are no longer needed for the installation. All that’s required is a single installation tool (included with each kit).

Smaller stack height — Using the R-Stack reduces the stack height 4” for every two elbows (a 20% reduction). Its reduced height makes the R-stack invaluable in small cabinets and manholes.

Less expensive — Molding one part instead of two (elbow and connecting plug) reduces the cost. Plus, the R-Stack can be installed faster and is more reliable, which saves even more time and money!

15kV Rating 25kV Rating
Operating Voltage 8.7kV 16.2kV
Impulse Withstand 95kV BIL  125kV BIL
AC Withstand 34kV 40kV
DC Withstand 53kV 78kV
Partial Discharge 11kV CEV 19kV CEV
Continuous Current (Aluminum/Copper)  600A/900A  600A/900A
Resource Details
PDF

62CBN

Product Data Sheets

15/25kV R-Stack

r-stack-brochure

R-Stack Brochure

Catalogs & Product Guides

Stacking Deadbreak Elbows has never been this easy

medium-voltage-catalog

Medium Voltage Catalog

Catalogs & Product Guides

Download a copy of our Medium Voltage Product Catalog for technical details and ordering information. If you don’t find what you are looking for, don’t hesitate to contact our team at the factory.