| UNDERGROUND EQUIPMENT | SERIES | PAGE |
| Bare Crab Joints for Joining Bare Neutral Cables |
FJB |
UG1 |
| Insulated Crab Joints |
FJI |
UG2 |
| Insulated Crab Joints – No Tape Type |
FJINT |
UG3 |
| Fusible Crab Joints – Tower Joints |
TWJ |
UG4 |
| Tower Joint Accessories – Cable End Caps & Shells |
TWJA |
UG5 |
| Tower Joint Accessories – Insulating Sleeves & Cap |
TWJS |
UG6 |
| Fusible Crab Joints with Pigtails |
CJLP |
UG7 |
| Crab Joints with Pigtails |
SJ |
UG8 |
| Mole Limiter Assembly |
RMLA |
UG9 |
| Cable-To-Cable Limiter Assembly |
CCLA |
UG10 |
| Cable-To-Cable Limiters |
CCL |
UG11 |
| Two-Piece Cable-To-Cable Limiter Insulating Sleeves |
LS |
UG12 |
| Limiter Lug Assembly |
CLLA |
UG13 |
| Limiter Lugs |
CLL |
UG14 |
| Limiter Lug Accessories – Insulating Sleeves & Shells |
LLS |
UG15 |
| Network Protector Terminals |
NPT |
UG16 |
| Disconnect Network Protector Terminals |
NPT-DISC |
UG18 |
| Disconnect Legs for Disconnect Network Protector Terminals |
RDL |
UG19 |
| Network Protector Fuses – Low-Loss “S” Fuse |
LLF |
UG20 |
| Network Protector Fuses – “Z” Fuse |
NPF-Q |
UG21 |
| Network Protector Fuses – “Y” Fuse |
NPF-L |
UG22 |
| Lead Alloy Network Protector Fuses – Laminated Type – Standard Speed |
Alloy Fuse |
UG23 |
| Lead Alloy Network Protector Fuses – Non-Laminated Type (Single Layer) |
NF |
UG25 |
| Copper Link Fuses |
NWP |
UG26 |
| Copper Braids |
CB |
UG27 |
| Secondary Spades |
TRSS |
UG28 |
| Set Screw Connectors |
SSCRW |
UG29 |
| Joint Casings |
JC |
UG30 |
| Cable Rack Arms |
RA |
UG31 |
| Stanchions |
RA |
UG32 |
| Standard Cable Rack Arms |
SRA |
UG33 |
| Rack Arms – Cable Hangers |
R003 |
UG34 |
